HEIDENHAIN MANUALplus 620 Technical Manual page 1437

Hide thumbs Also See for MANUALplus 620:

January 2012

Settings in the configuration editor

[Key name of the C axis]

CfgCAxisProperties

Deaktivate spindle S3 with the MP_axisMode parameter in CfgAxis.

Settings in the configuration editor

PhysicalAxis

[Key name of the spindle axis]

axisMode: NotActive

Set the MP_plcSpindleSelect parameter in CfgGlbDispSettings to TRUE to

define the spindle (e.g. main spindle, C axis or driven tool) to be assigned

the TSF dialog.

Settings in the configuration editor

DisplaySettings

CfgGlbDispSettings

plcSpindleSelect

7.12 Configuration of the Lathe

relatedWpSpindle: S1