HEIDENHAIN MANUALplus 620 Technical Manual page 1569

January 2012
MP_gearCode
Symbolic name or number of the PLC word for the gear range
Available from NCK software version: 597 110-01.
Format: String
Input: Name of the PLC word in which the gear range is transmitted
to the PLC
No entry: No gear range is transmitted
Default: No value, parameter optional
Access: LEVEL3
Reaction: RESET
MP_gearSpeed0
Key names of parameter sets for gear ranges (operating mode
0)
Available from NCK software version: 597 110-02.
Format: Array [0...99]
Input: List with key names for spindle parameter sets for operating
mode 0.
Default: –
Access: LEVEL3
Reaction: RESET
MP_gearSpeed1
Key names of parameter sets for gear ranges (operating mode
1)
Available from NCK software version: 597 110-02.
Format: Array
Input: List with key names for spindle parameter sets for operating
mode 1.
Default: –
Access: LEVEL3
Reaction: RESET
MP_gearStop
Switch off the spindle when the gear range is changed
(cf. iTNC 530: MP3030 bit#1)
Available from NCK software version: 597 110-03.
Format: Numerical value
Input: TRUE
If a strobe for changing the gear range is output, the control
automatically switches the spindle off.
FALSE
If a strobe for changing the gear range is output, the spindle is
not switched off.
Default: No value, parameter optional
Access: LEVEL3
Reaction: RESET
8.7 S Function (S Strobe) 1569