HEIDENHAIN MANUALplus 620 Technical Manual page 1585

Hide thumbs Also See for MANUALplus 620:

8.10 Python Settings (Option 46)

January 2012

Under System/PLC/PythonSettings you define general settings for software

option 46 "Python OEM Process."

Settings in the configuration editor

PythonSettings

CfgPythonScript

pythonScripts

Using CfgPythonScript you can specify a Python script that is to be started

automatically during start-up of the MANUALplus 620. In this case, a PLC

module call for starting the Python script is not required. The specified script

is started automatically when the Power Interrupted message is

acknowledged.

Proceed as follows to have a Python script started automatically during start-

Place the cursor on CfgPythonScript and press the INSERT soft key.

Enter a key name for the script (freely selectable) and specify the *.CFG

storage file.

In MP_path, MP_jobName, MP_parameter and MP_memLimit, define

the settings for calling the Python script.

For the script to be started automatically during start-up, the key name

defined in CfgPythonScript must be entered under System/Paths/

CfgPlcPath/pythonScripts, see "MP_pythonScripts" on page 1545.

8.10 Python Settings (Option 46)

[Key name of the Python script]