HEIDENHAIN MANUALplus 620 Technical Manual page 1556

Hide thumbs Also See for MANUALplus 620:

Adjust the M

function menu

In the DIN/ISO mode of the smart.Turn Programming mode you can insert M

functions directly into the NC program by means of an M Function menu (M

menu). The structure and menu texts of the M menu are defined in language-

sensitive files *.str under PLC:\resource\MFktMenu and can be adjusted to

the available M functions.

As the language of the M menu is not switched when the language is

changed during run time, the control must be re-started in such a case.

A menu entry comprises:

Menu position: 3-digit number

• 1st number: 1st menu level (1st pull-down menu)

The number 1 is assigned to "Program Functions"—please use the

numbers 2 to 9

• 2nd number: 2nd menu level—up to 9 entries under each entry of the

1st menu level

• 3rd number: 3rd menu level—up to 9 entries under each entry of the

2nd menu level

M number: appears after the menu item has been selected

• Further menu level follows: the M number has no significance

• Negative M number: The menu item is visible, but not selectable

Menu text: Menu item text (enclosed in quotation marks "....").

• Follows the closing quotation mark of the menu text

• Use a semicolon (";") to start the comment lines in the first column.

Line feeds can be inserted at any location.

HEIDENHAIN Technical Manual MANUALplus 620