HEIDENHAIN MANUALplus 620 Technical Manual page 1505

Field Function
Comment Name of the slave (for slaves and
slave modules) or terminal description
Option Designation of the option
Bus address HSCI/PROFIBUS address
Slot Slot number of the slave module
Terminal Terminal number
Operand Operand designation
Order no. Order number
Plan page Wiring diagram page
Pin name Terminal name
"State" window (at
lower right)
January 2012
Current status of selected HSCI/PROFIBUS component.
Value: Operand value of the terminal in decimal and hexadecimal code
Text: Error texts that appear when an error occurs; otherwise, no display.
The texts displayed are error-specific texts from the HDD/GSD file or the
error information configured in IOconfig.
Display of S status (31 bits) in HEX code. The meaning is displayed in
abbreviated form below the S status.
8.1 PLC Functions
Formed from...
Master entries:
• "Configuration file"
Master/slave entries:
• "Name"
• "Hardware ID"
• "Hardware serial number"
• "Firmware ID"
• "Firmware timestamp"
• "Configuration file"
Terminal entries:
• "Comment"
• "Pin name"
• "Plan page"
• "Order number"
Slave / slave module entered in "block"
Slave entered in "HSCI/PROFIBUS address"
Determined from the terminals entered in "I/O
offset" and "I/O bit"
Terminal entered in "PLC operand address"
"Order number" entered for the terminal
"Page" entered for the terminal
"Pin name" entered for the terminal
1505