Mammography Cassette Preparation - Kodak HEALTH SCIENCES MINILOADER 2 Plus Low Voltage Stand-Alone Installation Instructions Manual

II 3420

MAMMOGRAPHY CASSETTE PREPARATION.

All MINILOADER CASSETTES must be patched correctly otherwise reliable operation is impossible. The
CASSETTES should be patched as shown below using TOOLS 9194531 & 9194511. The correct PATCHES
are PART NUMBER 9194551, REFLECTIVE FOIL 8 x 15 mm. Place 3 PATCHES (8 x 15 mm) as shown
in figures 23 and 24, using the TOOLS as indicated.
If DIPSWITCH 6 on PCB 401 is turned on, no MAMMOGRAPHY CASSETTES should have a second
(TYPE 2) patch.
This is the TYPE 2
position.
Figure 23
Figure 24
© Kodak Ltd.
PATCH 2
PATCH 3
Page II-20
INSTALLATION INSTRUCTIONS
PATCH 1
January 1995