4.1.3
Image Control
You can configure the image settings for supported IP cameras.
Channel: Displays the channel number.
Setup: Click
to enter the setup page. You can use the left-side panel to adjust the
parameters. The system will automatically save the settings.
Day/Night Mode
Delay Switch(s)
Flip
Mirror
Channel: Select a channel number.
Day/Night Mode: Select a Day/Night mode for the camera to display the color or B/W images.
• GPIO Auto: Select GPIO Auto for the camera to automatically switch to day or night mode.
You can further set up a Delay Switch time (second) in the below field.
• Color Mode: Select Color Mode for the camera to display color images.
• Black White Mode: Select Black White Mode for the camera to display B/W images.
H.265 VANGUARD 16x8H Plus
38