Pir - EverFocus VANGUARD 16x8H Plus User Manual

4.3.2

PIR

After configuring the PIR Detection settings, you can further configure the PIR Alarm settings.
To configure the PIR Detection setting, click the PIR Detection button to enter the PIR
Detection setup page (please refer to 4.1.7 PIR).
Channel: Displays the channel number.
Buzzer: Select a time for DVR buzzer to sound when a PIR event is triggered. Select Disable to
disable the function.
Alarm Out: Select an external alarm output device connected to the DVR, IPCam or both.
Alarm Output: Select an alarm output time (duration) when events occur. When an event is
triggered, the alarm will last based on the setup latch time.
Channel: Click and select the desired channel(s) you want to record when a PIR event is
triggered on this channel. Note that for recording function to work, the Record Schedule
function has to be configured (please refer to 4.2.2.2 Record Schedule).
Post Recording: Select a post recording time when a PIR event is triggered.
Show Message: Check the box to display PIR on the live channel when a PIR event is triggered.
Send Email: Check the box to enable the Email alert function. When a PIR event is triggered,
the DVR will send an email alert with a snapshot to the pre-configured Email receiver. Note
that for this function to work, you have to set up the Email function in advance (refer to 4.4.3
Email).
Full Screen Trigger: If this function is enabled and a PIR event is triggered, the triggered
channel will be displayed in full screen.
H.265 VANGUARD 16x8H Plus
74