Pedestrian Detection - EverFocus VANGUARD 16x8H Plus User Manual

4.1.8.4 Pedestrian Detection

When camera detects moving people in a pre-defined area, the Pedestrian Detection event
will be triggered. You can configure some event actions like event recording, Email alert or
pop-up full screen when an event is triggered.
Detection
To configure the Pedestrian Detection settings:
1. Check the Switch checkbox to enable the function of the channel.
2. In the Level field, select among Far, Middle and Near. Far level is recommended to
detect objects in long distance. Near level is recommended to detect objects in short
distance.
3. In the Scene field, select Indoor or Outdoor based on the location where your camera is
installed.
4. In the Setup field, click
Configuring Pedestrian Detection Area for more details.
5. Click the Apply button to save the settings
6. To further set up the alarm notifications, click the Alarm button to enter the Alarm setup
page. Please refer to 4.3.4 Intelligent Alarm.
7. If you want to activate the intelligent recording function, you need to configure the
recording schedule. Please refer to 4.1.8.9 Record Schedule.
to set up the detection areas. Please refer to 4.1.8.4.1
53
H.265 VANGUARD 16x8H Plus