Privacy Mask - EverFocus VANGUARD 16x8H Plus User Manual

5.3.3.7 Privacy Mask

This function is only available for analog cameras. The Privacy Mask can block out sensitive
areas from view. This feature is useful when users don't want the sensitive information visible.
Up to four Privacy Masks can be configured.
Mask
To configure privacy masks:
1. Select a channel from the Channel drop-down list.
2. Switch the Privacy Mask button to the right to enable the function.
3. Use your mouse to draw a rectangle area (mask) on the right-side image. Up to 4 areas are
available.
4. You can drag the area and drop the area to the desired location on the image. If you want
to adjust the size of the area, drag the edge of the area to re-size.
5. Click the Save button to save the settings.
Click Save to save the settings or Refresh to refresh the page.
Click the Copy button to display the channel options. Select the channels and then click the
Copy button to copy the same configurations from this channel to the selected channels.
H.265 VANGUARD 16x8H Plus
167