Utc Control - EverFocus VANGUARD 16x8H Plus User Manual

3.5.2.3 UTC Control

Click UTC to enter the UTC Control panel. On this panel, you can display the analog camera
OSD menu and configure the camera OSD settings.
Note: For EverFocus' PTZ cameras, only the UTC-supported PTZ cameras support the UTC
function.
To perform the UTC Control function:
1. Select a camera and then select UTC1 or UTC2 from the Protocol drop-down list.
2. Click the button, the camera OSD menu will be displayed.
3. You can use the Up / Down / Left / Right buttons to select among the OSD menu items
and use as the Enter button to enter the setup menu.
Select a channel
Click to enter the UTC control panel
Select a Protocol
Operation Keys
30
H.265 VANGUARD 16x8H Plus