Foreign/Missing Object - EverFocus VANGUARD 16x8H Plus User Manual

5.3.3.8.3 Foreign/Missing Object

When DVR detects foreign (unattended) or missing objects in a pre-defined area, the
Foreign/Missing Object event will be triggered. You can configure some event actions like event
recording, Email alert or pop-up full screen when an event is triggered.
Perimeter Intrusion
Line-Crossing
Foreign/Missing Object
Pedestrian Detection
Face Detection
Cross-Counting
Sound Detection
Tamper Detection
To configure the settings:
1. Select a channel and then switch the Switch button to the right to enable this function.
2. Select a sensitivity value. The larger the value, the higher the sensitivity.
3. Select Indoor or Outdoor based on the location where your IP camera is installed.
4. Select 1 from the Rule Number drop-down list to configure the first area.
5. Enable the Rule Switch and then define a Rule Type.
Foreign & Missing: DVR will detect both missing objects and unattended objects.
6. Switch the IVA Lines button to the right if you want to enable displaying the IVA line on the
live streams.
7. To draw an area:
a. Use your mouse to click 4 points to draw a rectangle shape. The shape should be convex.
Concave shape is not allowed.
b. If you want to move the area to other position or re-size the area, select the area by
checking the red box on the upper-left corner of the area, the borders of the area will
change to red color. Drag and drop the area to a desired position. Drag the red dots at
the edge of the area can re-size the area.
1 Missing & Foreign
H.265 VANGUARD 16x8H Plus
172