Image Control - EverFocus VANGUARD 16x8H Plus User Manual

5.3.3.3 Image Control

You can configure the image settings for the supported IP cameras.
Channel: Select a channel number.
Day/Night Mode: Select a Day/Night mode for the camera to display the color or B/W images.
• GPIO Auto: Select GPIO Auto for the camera to automatically switch to day or night mode.
You can further set up a Delay Switch time (second) in the below field.
• Color Mode: Select Color Mode for the camera to display color images.
• Black White Mode: Select Black White Mode for the camera to display B/W images.
• Schedule (B/W): Select Schedule (B/W) for the camera to display B/W images during the
setup time range. Please select the Start Time and End Time in the below field.
Delay Switch (s): This function can only be activated if you select Auto for the Day/Night Mode.
Set up a delay switch time (seconds) for the camera to auto switch between day and night
modes.
IR-LED: Select On to turn on IR LEDs; select Off to turn off IR-LED; select Auto for the camera to
automatically turn on / off the IR-LED based on the light sensor on the IP camera.
Flip: Switch the button to the right to enable the Flip function. The image will be rotated
vertically around a horizontal axis.
Mirror: Switch the button to the right to enable the Mirror function. The image will be rotated
horizontally around a vertical axis.
Angle Rotation: Select a rotate angle.
H.265 VANGUARD 16x8H Plus
162