Tamper Detection - EverFocus VANGUARD 16x8H Plus User Manual

4.1.8.8 Tamper Detection

To configure the Tamper Detection settings:
1. Check the Switch checkbox to enable the function of the channel.
2. Select a Sensitivity value from the drop-down list. The larger the value, the higher the
sensitivity.
3. Click the Apply button to save the settings.
4. To further set up the alarm notifications, click the Alarm button to enter the Alarm setup
page. Please refer to 4.3.4 Intelligent Alarm.
5. If you want to activate the intelligent recording function, you need to configure the
recording schedule. Please refer to 4.1.8.9 Record Schedule.
H.265 VANGUARD 16x8H Plus
60