EverFocus VANGUARD 16x8H Plus User Manual page 182

c. Click the Save button to save the settings.
d. Follow the steps above to configure more lines. Up to 4 lines can be configured.
e. You can click the Clear button to remove all the lines. To remove a certain line, select
the line by checking the red box on the upper-side of the line, and then click the Delete
button.
Note: The configured lines should not be too short in order to enhance the detection
rate.
8. You can click the Copy button to display the channel options. Select the channels and then
click the Copy button to copy the same configurations from this channel to the selected
channels.
9. To further set up the Intelligent alarm function, enter the alarm setup page (please refer to
5.3.5.4 Intelligent Alarm).
10. To activate the intelligent recording function, you need to configure the record schedule
(please refer to 5.3.3.8.9 Record Schedule).
H.265 VANGUARD 16x8H Plus
171