EverFocus VANGUARD 16x8H Plus User Manual page 34

Channel State
4
System Date
5
and Time
Quick Add
6
Drag Channel
7
Icon
8 Live Channel
Layout Page
9
Icons
10 Edit
The wordings displayed on the channel represent:
VIDEO LOSS: Analog camera is disconnected.
No Camera: IP camera is disconnected.
Displays system date and time. To change system date and time, go to
OSD Menu > System > General > Date and Time.
The Quick Add icon
open the Quick Add menu to add IP cameras. Please refer to 4.1.1.2 IP
Channels for more details.
You can drag and drop a channel to the desired position on the layout.
Click on a channel, a Drag Channel icon will display. Drag and drop the
channel to the desired position on the layout.
Double-click on a channel can display the channel in full screen. To exit
the full screen mode, double-click on the channel again.
In full screen mode, you can:
•
Left-click to bring up the Live Channel Tool Bar. Please refer to
3.5 Live Channel Tool Bar for more details.
•
Scroll the mouse to zoom in or zoom out the images, and then
use your mouse to drag the image to the desired positions to spot
on a specific area.
Move your mouse cursor to the left or right edge of the screen, the
Next icon or Previous icon
icon to turn to the previous / next layout pages. For example, for 16CH
device, if you select 9-Division, click the next layout page icon (on the
right side) will display the next 9-division layout with channel 10-16.
The Edit icon only displays on the IP camera channel. When IP
camera connection failed, this icon will appear. Click to open the Edit
Connection Information menu to edit the IP camera parameters.
Please refer to 4.1.1.2 IP Channels for more details.
23
H.265 VANGUARD 16x8H Plus
only displays on the IP camera channel. Click to
will appear. Click the Previous / Next