Table of Contents
Related Manuals for EverFocus DHV-410M
Summary of Contents for EverFocus DHV-410M
-
Page 1: Digital Video Recorder
Four Channel Digital Video Recorder Models: DHV-410M Installation / User Manual Version 1.2 Before attempting to connect or operate this product, please read this manual carefully and keep it for future use. © Copyright 2004... -
Page 2: Table Of Contents
CONTENTS ¡ ½ PREFACE-------------------------------------------------------------------------------------------- 2 ¡ ½ FEATURES------------------------------------------------------------------------------------------ 2 ¡ ½ SPECIFICATIONS--------------------------------------------------------------------------------- 3 ¡ ½ MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS 1>Front View----------------------------------------------------------------------------------------------- 4 2>Rear View----------------------------------------------------------------------------------------------- 5 3>Bottom View(NTSC/PAL system SELECT)----------------------------------------------------- 6 ¡ ½ MENU AND SYSTEM SETUP 1. >MENU 1 1.1>... -
Page 3: Preface
PREFACE ¡ ½ This is an advanced 4 channel standalone digital video recorder, that combines video multiplexing, digital video recording in a single easy to use and install package. It can be easily installed into your existing surveillance system since it provides 2 composited video signal outputs to connect CCTV monitor directly. -
Page 4: Specifications
SPECIFICATIONS ¡ ½ Item Descriptions Video Input Format NTSC/PAL Video Input Channel 4 channels Video Looping Channel 4 channels Output 1:1Vp-p/75£ [ ;Output2:1Vp-p/75 £ [ Video Output (3 outputs) Output 3:Y/C NTSC Real Time Display Real Time Recording Rate NTSC Real Time. -
Page 5: Major Operating Controls And Their Functions 1>Front View
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ¡ ½ 1> Front View (b) (c) (d)(e) (f) (g) (h) (i) (j) (k) (l) (n) (p) (o) (m) (a) Power Indicator Display Channel 1 in full screen format Display Channel 2 in full screen format Display Channel 3 in full screen format Display Channel 4 in full screen format Display 4 channels in quad screen format... -
Page 6: 2>Rear View
Move the > cursor down or right (q) HDD cartridge 2> Rear View (a) (b) (l) (c) (g) (h) ( i ) ( j ) (a) IDE Plug - The connection port for the external HDD (Slave HDD) (b) IDE Power - The power for the external HDD (Slave HDD) (c) Y/C Output (d) Video Signal output 1 (1Vp-p/75£... -
Page 7: 3>Bottom View(Ntsc/Pal System Select)
3> Bottom View ( SELECT ) NTSC / PAL System To change NTSC / PAL System SELECT Switch Version 1.2... -
Page 8: Menu And System Setup
MENU AND SYSTEM SETUP There are two pages in setup menu. To enter the MENU 1, press the MENU button on the front panel. ¡ ½ To enter MENU 2, select the NEXT PAGE and press the SELECT button. ¡ ½ To exit the setup menus, press the MENU button. -
Page 9: Record Mode Select
1.3> RECORD MODE SELECT The recorder provides two recording modes. 1.3.1> The DUAL mode In live monitoring or playing back, user can view full screen images of a specific camera or the images of all seclected cameras in quad format. 1.3.2>... -
Page 10: Sensor Setup
1.7> SENSOR SETUP To enter the SENSOR SETUP menu, press the SELECT button, a sub menu display as follows, SENSOR SETUP > POST-ALARM RECORD TIME ALARM DURATION CHANNEL-1 TYPE: NORMAL-OPEN CHANNEL-2 TYPE: NORMAL-CLOSE CHANNEL-3 NOT INSTALLED CHANNEL-4 TYPE: NORMAL-OPEN 1.7.1> POST-ALARM RECORD TIME When sensors or motion detection are activated, they will trigger the recorder to record. -
Page 11: Motion Detection Setup
1.8> MOTION DETECTION SETUP MOTION DET SETUP > MOTION DET CAMERA SELECT 1 2 3 4 MOTION DET CAMERA SENSITIVITY VIDEO LOSS CAMERA SELECT 1 2 3 4 VIDEO LOSS ALARM 1.8.1> MOTION DET CAMERA SELECT To select cameras to enter or exit motion detection mode. All options can be completed in rotation by pressing the SELECT button. -
Page 12: Hard Disk Drive Setup
1.9> HARD DRIVE SETUP To enter the HARD DRIVE SETUP menu, press the SELECT button. A sub menu shows as follows, HARD DRIVE SETUP > OVERWRITE ENABLED MASTER HDD SIZE 76319 MB MASTER HDD USED 1968 MB MASTER HDD FORMAT SLAVE HDD SIZE 76319 MB SLAVE HDD USED... -
Page 13: Password Setup
2> MENU 2 Select NEXT PAGE in MENE 1 and press the SELECT button to enter MENU2. MENU 2 > PASSWORD SETUP TIME SETUP ENG/¤ ¤ LANGUAGE SELECT 2.1> PASSWORD SETUP Pressing the SELECT button to enter the sub menu is as follows. CURRENT PASSWORD _ _ _ _ _ _ NEW PASSWORD... -
Page 14: Sensor Alarm Beep
2.5> SENSOR ALARM BEEP ON: Under sensor alarm mode, the DVR beeps when it is activated to record. OFF: No beeping. 2.6> HDD FULL BEEP ON: The DVR will beep when the running HDD is 99% full. The beeping continues unless the HDD is full. - Page 15 4.3> Key lock Status Power status Security status Segment Locked (Non-removable) Locked (Non-removable) Unlocked (Removable) 4.4> Installing Hard Drive into Cartridge Step 1 1-1 . Pull the active-handle outwards and use the miniature key provided and insert into the keyhole, turning the key anti-clockwise, then the handle will auto-eject for pulling out.
-
Page 16: Hard Disk Drive Installation
Step 4 4-1. Slide the top cover back to the carrier body by sliding forward to secure. (Fig.6) Fig. 6 Step 5 5-1. Slide the carrier body into the recorder and push carrier body further into cartridge frame until fully inserted. (Fig.7 and Fig.8) Fig. -
Page 17: Connecting External Hard Disk Drive
6> MASTER/SLAVE HARD DISK DRIVE CONFIGURATION Slave HDD Master HDD The swappable hard disk drive installed in the recorder should be set as master drive. ¡ ½ When the external hard disk drive is installed, it should be set as slave drive. ¡... -
Page 18: Recording And Playback
7> SECURITY LOCK PAUSE DVR allows security lock function for button on the front panel. Press five time "||" button into security lock mode. At once under security lock mode, monitor will display ¡ @ s ymbol on right-upper corner of screen. Press five time "||" button again to disable security lock mode. -
Page 19: Security Lock
DUAL REC: In live monitoring or playing back, user can view full screen images ¡ ½ of a specific camera or the images of all seclected cameras in quad format. DHV-410M Recording Time Table NTSC (DUAL) fields per second/system fields per second/channel... - Page 20 QUAD REC: User can view live quad format images and play back the quad ¡ ½ format images in real-time speed. DHV-410M Recording Time Table NTSC (QUAD) fields per second/system Hours / 80GB High Normal Hours / 120GB High Normal...
-
Page 21: Precording
1.2>[M] / [S] [M] : Images are recorded to mater hard disk drive. ¡ ½ [S] : Images are recorder to slave hard disk drive. ¡ ½ 1.3> (A) / (S) / (-) (A) : The recorder records continuously. ¡ ½ (S) : The recorder reacts to start recording while activated by any sensor ¡... -
Page 22: Playback
> PLAYBACK To play back, Press the button to enter playback menu. SEARCH TIME HARD DRIVE: MASTER 03/04/27 08:05:34 -- 03/05/12 18:27:09 --------- RECORD LIST --------- 01 CONT 2003 / 05 / 12 07: 43: 12 02 SENSOR 2003 / 05 / 12 02: 23: 54 03 SENSOR 2003 / 05 / 12 01: 44: 35 04 CONT 2003 / 05 / 11 10: 17: 22...