EverFocus VANGUARD 16x8H Plus User Manual page 231

H.265 VANGUARD 16x8H Plus
Date: Select the start date (click the calendar icon), end date and time when Daylight Saving
starts and ends.
Time Offset: Select the amount of time that Daylight Saving has increased by in your time zone.
This refers to the difference in minutes, between Coordinated Universal Time (UTC) and the
local time.
Start Time: Select a start time for the DST to start.
End Time: Select an end time for the DST to stop.
【NTP Settings】Select NTP and then configure the below settings. The NTP (Network Time
Protocol) function allows your DVR to automatically sync its clock with a time server. This gives
it the ability to constantly have an accurate time setting (your DVR will periodically sync
automatically).
Enable NTP: Switch the button to the right to enable the NTP function. When NTP function is
enabled, the system will calibrate the system time at 00:07:50 daily and every time when the
system is started up.
Server Address: Select a NTP server.
Time Zone: Select a time zone of your region.
Click Save to save the settings or Refresh to refresh the page.
220