EverFocus VANGUARD 16x8H Plus User Manual page 57

desired location on the image. If you want to adjust the size of the area, drag the red
dots to re-size.
e. To save the settings, right-click the mouse to return to the PIR Setup page and then
click Apply to save the settings.
2. To further set up the PIR event notifications, click the Alarm button to enter the PIR Alarm
Settings page (please refer to 4.3.2 PIR).
3. If you want to activate the PIR recording function, you need to configure the recording
schedule. Please refer to 4.2.2.2 Record Schedule.
H.265 VANGUARD 16x8H Plus
46