Snapshot - EverFocus VANGUARD 16x8H Plus User Manual

5.3.4.3 Snapshot

On this page, you can configure the snapshot parameters or set up the snapshot schedule.
5.3.4.3.1 Snapshot
On this page, you can configure the snapshot parameters.
Stream
Snapshot
Snapshot
Snapshot Schedule
Channel: Select a channel from the drop-down list.
Stream Mode: Select main stream or sub stream for the snapshot image.
Normal Interval: Configure an interval to automatically take a normal snapshot. For this
function to work, you will have to configure the Snapshot Schedule. Please refer to 5.3.4.3.2
Snapshot Schedule.
Alarm Interval: Configure an interval to automatically take a snapshot when motion, IO alarm
or PIR is triggered. For this function to work, you will have to configure the Snapshot Schedule.
Please refer to 5.3.4.3.2 Snapshot Schedule.
Snapshot Resolution: Select a resolution for the alarm snapshot image.
Snapshot Quality: Select an image quality for the alarm snapshot image.
Auto Snapshot: Switch the button to the right to enable the Auto Snapshot function for normal
recording, motion, IO, PIR events.
Click Save to save the settings or Refresh to refresh the page.
Click the Copy button to display the channel options. Select the channels and then click the
Copy button to copy the same configurations from this channel to the selected channels.
H.265 VANGUARD 16x8H Plus
191