EverFocus VANGUARD 16x8H Plus User Manual page 163

To set up Preset Points:
1. Select a preset number (1-255) by clicking on the Preset input box.
2. Use the direction buttons or Zoom/Focus/Iris buttons to search for the location for this
preset number.
3. Click the + button to add this preset point, and the number will jump to the next preset
number for configuration. Follow Step 2-3 to set up multiple preset points.
4. To clear the setup preset points, select a preset number and then click the
To perform the Go to Preset Point function:
1. Select a preset number (1-255) by clicking on the Preset input box.
2. Click the Go to button
To perform the Tour function:
1. Set up the preset points in advance. Please refer to the steps of "To set up Preset Points"
above.
2. Input an interval time in the Interval box.
3. Click the Start Tour button
configured preset points with the dwell time.
4. To stop the Tour function, click the Stop Tour button
.
, the PTZ camera will start cruising based on the pre-
152
H.265 VANGUARD 16x8H Plus
button.
.