Face Detection - EverFocus VANGUARD 16x8H Plus User Manual

5.3.3.8.5 Face Detection

When DVR detects faces of moving people in a pre-defined area, the Face Detection event will
be triggered. You can configure some event actions like event recording, Email alert or pop-up
full screen when an event is triggered.
Perimeter Intrusion
Line-Crossing
Foreign/Missing Object
Pedestrian Detection
Face Detection
To configure the settings:
1. Select a channel and then switch the Switch button to the right to enable this function.
2. Select 1 from the Rule Number drop-down list to configure the area.
3. Enable the Rule Switch and then define a Rule Type. Only Normal type is available.
4. To draw an area:
a. Use your mouse to click 4 points to draw a rectangle shape. The shape should be
convex. Concave shape is not allowed.
b. If you want to move the area to other position or re-size the area, select the area by
checking the red box on the upper-left corner of the area, the borders of the area will
change to red color. Drag and drop the area to a desired position. Drag the red dots at
the edge of the area can re-size the area.
1
c. Click the Save button to save the settings.
d. You can click the Clear button to remove all the areas. To remove a certain area, select
the area by checking the red box on the upper-left corner of the area, and then click
the Delete button.
Note: The configured areas should include the whole front face.
H.265 VANGUARD 16x8H Plus
176