EverFocus VANGUARD 16x8H Plus User Manual page 50

• Schedule (B/W): Select Schedule (B/W) for the camera to display B/W images during the
setup time range. Please select the Start Time and End Time in the below field.
Delay Switch (s): This function can only be activated if you select Auto for the Day/Night
Mode. Set up a delay switch time (seconds) for the camera to auto switch between day and
night modes.
IR-LED: Select On to turn on IR LEDs; select Off to turn off IR-LED; select Auto for the camera
to automatically turn on / off the IR-LED based on the light sensor on the IP camera.
Flip: Check the box to the right to enable the Flip function. The image will be rotated vertically
around a horizontal axis.
Mirror: Check the box to the right to enable the Mirror function. The image will be rotated
horizontally around a vertical axis.
Angle Rotate: Select a rotate angle.
Backlight: Select Enable to enable the BLC (Backlight Compensation) function.
BLC Level: Adjust the level for the BLC function.
BLC Area: Select an area to apply the BLC function.
3D Noise Reduction:
• Auto: Select Auto for the camera to automatically turn on the 3DNR function.
• Manual: Select to turn on the 3DNR function based on the setup Level.
• Disable: Select to disable the 3DNR function.
WDR: Select Enable to enable the WDR function and then you will have to adjust a Level for
the WDR function.
AGC: If you select Manual in the Shutter field, set up the AGC for the camera. The lower the
AGC level, the lower the video signal and the noise.
White Balance:
• Auto: Select for the camera to automatically adjust the white balance.
• Manual: Select to adjust the Red, Green, Blue values yourself.
• Indoor: Select Indoor if your camera is installed in an indoor environment.
Shutter:
• Auto: Select for the camera to automatically adjust the Shutter.
• Manual: Select to manually adjust the shutter speed. Select a speed in the Time Exposure
field. Also set up the AGC in the AGC field above.
Time Exposure: If you select Auto in the Shutter field, the camera will automatically apply a
max. shutter speed. If you select Manual in the Shutter field, select a shutter speed from the
drop-down list.
Defog Mode:
• Auto: Select Auto for the camera to automatically turn on the Defog function.
• Manual: Select to turn on the Defog function based on the setup Level.
• Disable: Select to disable the Defog function.
Click Default to restore to default settings.
H.265 VANGUARD 16x8H Plus
39