Tamper Detection - EverFocus VANGUARD 16x8H Plus User Manual

5.3.3.8.8 Tamper Detection

Perimeter Intrusion
Line-Crossing
Foreign/Missing Object
Pedestrian Detection
Face Detection
Cross-Counting
Sound Detection
Tamper Detection
To configure the Tamper Detection settings:
1. Select a channel and then switch the Switch button to the right to enable this function.
2. Select a Sensitivity value from the drop-down list. The larger the value, the higher the
sensitivity.
3. Click the Save button to save the settings.
4. You can click the Copy button to display the channel options. Select the channels and then
click the Copy button to copy the same configurations from this channel to the selected
channels
5. To further set up the Tamper alarm function, enter the alarm setup page (please refer to
5.3.5.4 Intelligent Alarm).
6. To activate the Tamper recording function, you need to configure the record schedule
(please refer to 5.3.3.8.9 Record Schedule) and enable the Recording function on the
Tamper Alarm setup page (please refer to 5.3.5.4 Intelligent Alarm).
H.265 VANGUARD 16x8H Plus
181