I/O Alarm - EverFocus VANGUARD 16x8H Plus User Manual

H.265 VANGUARD 16x8H Plus

5.3.5.3 I/O Alarm

After connecting the external IO devices to the DVR or IPCam, you can further configure the IO
Alarm settings.
Alarm In: Select an alarm input number.
Alarm Type: Select an alarm type for the alarm input. Options include Normally-Open,
Normally-Close and Off.
Buzzer: Select a time for DVR buzzer to sound when an IO event is triggered. Select Disable to
disable the function.
Alarm Output: Select an alarm output time (duration) when events occur. When an event is
triggered, the alarm will last based on the setup latch time.
Post Recording: Select a post recording time when an event is triggered.
Send Email: Switch the button to the right to enable the Email alert function. When an event is
triggered, the DVR will send an email alert with a snapshot to the pre-configured Email receiver.
Note that for this function to work, you have to set up the Email function in advance (refer to
5.3.6.3 Email).
Show Message: Switch the button to the right to enable displaying an alarm message on the
live channel when an event is triggered.
Full Screen: Switch the button to the right to enable the full screen function. If this function is
enabled and an event is triggered, the triggered channel will be displayed in full screen.
198