Cross-Counting Detection - EverFocus VANGUARD 16x8H Plus User Manual

5.3.3.8.6 Cross-Counting Detection

The DVR will count the times when objects (people, vehicle or other objects) cross a pre-
defined line, and the Cross-Counting event will be triggered. You can configure some event
actions like event recording, Email alert or pop-up full screen when an event is triggered.
You can search and view the statistical result of cross-counting on the Intelligent Analysis page.
Please refer to 3.3.3.8.10 Cross-Counting Analysis.
Perimeter Intrusion
Line-Crossing
Foreign/Missing Object
Pedestrian Detection
Face Detection
Cross-Counting
To configure the settings:
1. Select a channel and then switch the Switch button to the right to enable this function.
2. Select a sensitivity value for the Cross-Counting Detection. The larger the value, the higher
the sensitivity.
3. Select Indoor or Outdoor based on the location where your IP camera is installed.
4. Select 1 from the Rule Number drop-down list to configure the area.
5. Enable the Rule Switch to enable this rule.
AB: Detects movement from A to B.
6. To draw a line:
a. Use your mouse to click 2 points to draw a line.
b. If you want to move the line to other position or re-draw the line, select the line by
checking the red box on the upper-side of the line, the line will change to red color.
Drag and drop the line to a desired position. Drag the red dots of the line can re-size
the line.
B
A
1
178
H.265 VANGUARD 16x8H Plus