Cross-Counting Detection - EverFocus VANGUARD 16x8H Plus User Manual

4.1.8.6 Cross-Counting Detection

The camera will count the times when objects (people, vehicle or other objects) cross a pre-
defined line, and the Cross-Counting event will be triggered. You can configure some event
actions like event recording, Email alert or pop-up full screen when an event is triggered.
You can search and view the statistical result of cross counting on the Intelligent Analysis
page. Please refer to 4.1.8.10 Cross-Counting Analysis.
Detection
Detection
Detection
To configure the Cross-Counting settings:
1. Check the Switch checkbox to enable the function of the channel.
2. Select a Sensitivity value from the drop-down list. The larger the value, the higher the
sensitivity.
3. In the Scene field, select Indoor or Outdoor based on the location where your camera is
installed.
4. In the Setup field, click
Configuring Cross-Counting Detection Line for more details.
5. Click the Apply button to save the settings
6. To further set up the alarm notifications, click the Alarm button to enter the Alarm setup
page. Please refer to 4.3.4 Intelligent Alarm.
7. If you want to activate the intelligent recording function, you need to configure the
recording schedule. Please refer to 4.1.8.9 Record Schedule.
to set up the detection line. Please refer to 4.1.8.6.1
57
H.265 VANGUARD 16x8H Plus