EverFocus VANGUARD 16x8H Plus User Manual page 162

For PTZ cameras, select a PTZ camera by clicking on the PTZ channel, the selected channel will
be highlighted with a red frame. You can double-click to display the channel in full screen for
operation. Click the PTZ Setting button, the below PTZ Setting panel appears. You can use this
panel to control PTZ cameras.
Direction Buttons: Click the direction buttons to force the PTZ camera to turn to the direction.
Auto Pan: Click to start the Auto Pan function. Click again to stop the Auto Pan function.
Speed: Slide the bar to the left or right to adjust the control speed.
Zoom: Click + or – to zoom in or zoom out.
Focus: Click + or – to focus near or focus far.
Iris: Click + or – to adjust the Iris.
Preset Control: You can set up preset points here and then operate the Preset function.
Please see the below steps for more details.
Tour Control: After setting up the preset points, you can perform the Tour function. Click
to start the Tour function, click
Direction Buttons
Auto Pan
Speed
Zoom In (+) / Zoom Out (-)
Focus Near (+) / Focus Far (-)
Iris Open (+) / Iris Close (-)
Preset Conrol
Tour Control
to stop the Tour function.
151
H.265 VANGUARD 16x8H Plus