Hard Disk Compatibility List; Basic Connection; Terminal Block - EverFocus VANGUARD 16x8H Plus User Manual

2.1.1 Hard Disk Compatibility List

Please go to the product page (Download) on EverFocus' Website
the latest Storage Compatibility List. It's recommended to use the hard disk models listed on the
Storage Compatibility List to ensure your hard disks are compatible.
Note: If using two or more hard disks, please choose the hard disks with the same capacity.

2.2 Basic Connection

2
Camera 1~16
1. To record videos, install 3.5" HDD(s) to the DVR. Please refer to 2.1 Hard Disk Installation.
2. Connect the TVI/AHD/SD cameras to the BNC ports.
3. Connect microphones to the audio input ports to transmit audio from the camera to the DVR.
Note that the microphones with a (built-in) amplifier and external power supply are required.
4. To view videos at local site, connect a monitor to the HDMI or VGA port using the HDMI or
VGA cable supplied by the monitor manufacturer.
5. To listen to the audio from device side, connect speakers to the audio output. Note that the
speakers with a (built-in) amplifier and external power supply are required.
6. Use a standard RJ-45 CAT5 Ethernet cable to connect the DVR to the network and then
optionally connect IP cameras to the DVR.
7. Optionally connect a mouse to the DVR to control the system. You can also control the
system using the supplied IR Remote Control).
8. Use the supplied Power Cord and Adaptor to connect the DVR to the power outlet.
2.2.1

Terminal Block

VANGUARD 16x8H Plus provides 16 alarm inputs, 1 alarm output and 1 RS-485.
Line Level
Audio Input
3
1
3.5" HDD
VANGUARD
CMS
H.265 VANGUARD 16x8H Plus
www.everfocus.com.tw
Line Level
Audio Out
5
Network
Web Remote
IP Camera
Client
6
to see
Monitor
(HDMI / VGA)
4
7 8
6
Power
supply
Mouse