EverFocus VANGUARD 16x8H Plus User Manual page 184

c. Click the Save button to save the settings.
d. Follow the steps above to configure more areas. Up to 4 areas can be configured.
e. You can click the Clear button to remove all the areas. To remove a certain area, select
the area by checking the red box on the upper-left corner of the area, and then click the
Delete button.
Note: For foreign/missing object, please draw an area slightly larger than or
equal to the detected object, and the detected object cannot be covered.
8. You can click the Copy button to display the channel options. Select the channels and then
click the Copy button to copy the same configurations from this channel to the selected
channels.
9. To further set up the Intelligent alarm function, enter the alarm setup page (please refer to
5.3.5.4 Intelligent Alarm).
10. To activate the intelligent recording function, you need to configure the record schedule
(please refer to 5.3.3.8.9 Record Schedule).
1 Lost & Legacy
173
H.265 VANGUARD 16x8H Plus