Email Schedule - EverFocus VANGUARD 16x8H Plus User Manual

H.265 VANGUARD 16x8H Plus

4.4.3.2 Email Schedule

You can configure the email schedule on this page. The selected event Email alerts will be
sent out by the scheduled time. For example, if you set up Motion on Sunday between 6-
8am, the Motion Email alerts will only be sent out between 6-8am on Sunday.
Channel: Select a channel to configure the email schedule individually.
Motion: Click the Motion button on the right-side and then move your mouse cursor over
the schedule time blocks. Click and drag on the schedule time blocks to draw the blocks with
green color, which will be applied with motion email alert function. To enable Motion alarm,
please refer to 4.1.6 Motion.
IO: Click the IO button on the right-side and then move your mouse cursor over the schedule
time blocks. Click and drag on the schedule time blocks to draw the blocks with yellow color,
which will be applied with IO email alert function. To enable IO alarm, refer to 4.3.3 IO.
Exception (HDD full, HDD error or Video Loss): Click the Exception button on the right-side
and then move your mouse cursor over the schedule time blocks. Click and drag on the
schedule time blocks to draw the blocks with red color, which will be applied with exception
email alert function. To enable Exception alarm, please refer to 4.3.6 Exception.
Intelligent Analysis: Click the Intelligent Analysis button on the right-side and then move
your mouse cursor over the schedule time blocks. Click and drag on the schedule time blocks
to draw the blocks with blue color, which will be applied with Intelligent Analysis email alert
function. To enable Intelligent Analysis alarm, please refer to 4.3.4 Intelligent Alarm.
PIR: Click the PIR button on the right-side and then move your mouse cursor over the
schedule time blocks. Click and drag on the schedule time blocks to draw the blocks with
purple color, which will be applied with PIR email alert function. To enable PIR alarm, please
refer to 4.1.7 PIR.
Copy: You can apply the same configurations from one channel to other channels. Select a
channel from the Source Channel drop-down list and then select the parameters you would
like to apply to other channels. Select the desired channels from the Target Channel field
and then click the Copy button.
Default: Click to apply the default setting.
Apply: Click to save the settings.
90