Face Detection; Configuring Face Detection Area - EverFocus VANGUARD 16x8H Plus User Manual

4.1.8.5 Face Detection

When camera detects faces of moving people in a pre-defined area, the Face Detection
event will be triggered. You can configure some event actions like event recording, Email
alert or pop-up full screen when an event is triggered.
Detection
Detection
To configure the Face Detection settings:
1. Check the Switch checkbox to enable the function of the channel.
2. In the Setup field, click
Configuring Face Detection Area for more details.
3. Click the Apply button to save the settings
4. To further set up the alarm notifications, click the Alarm button to enter the Alarm setup
page. Please refer to 4.3.4 Intelligent Alarm.
5. If you want to activate the intelligent recording function, you need to configure the
recording schedule. Please refer to 4.1.8.9 Record Schedule.

4.1.8.5.1 Configuring Face Detection Area

Click the Setup button
to set up the detection areas. Please refer to 4.1.8.5.1
to enter the Area setup page.
55
H.265 VANGUARD 16x8H Plus