Sound Detection - EverFocus VANGUARD 16x8H Plus User Manual

5.3.3.8.7 Sound Detection

This function is only available when the supported analog/IP cameras with sound detection
function are connected. For the supported cameras, please contact EverFocus
(ts@everfocus.com.tw).
Perimeter Intrusion
Line-Crossing
Foreign/Missing Object
Pedestrian Detection
Face Detection
Cross-Counting
Sound Detection
To configure the settings:
1. Select a channel and then switch the Enable button to the right to enable this function.
2. Switch the Rise button to the right to enable the Sound Rise detection. And then further
set up the Rise Sensitivity and Sound Intensity.
3. Switch the Decline button to the right to enable the Sound Decline detection. And then
further set up the Decline Sensitivity.
4. If you want to enable recording when sound detection alarm is triggered, click the Schedule
button, the below record schedule setup window appears. Click and drag on the schedule
time blocks to draw the blocks with blue color, which will be applied with Sound Detection.
Click Save to save the record schedule.
5. Click the Save button to save the settings.
6. You can click the Copy button to display the channel options. Select the channels and then
click the Copy button to copy the same configurations from this channel to the selected
channels.
7. To further set up the Sound alarm function, enter the alarm setup page (please refer to
5.3.5.4 Intelligent Alarm).
H.265 VANGUARD 16x8H Plus
180