Record - EverFocus VANGUARD 16x8H Plus User Manual

H.265 VANGUARD 16x8H Plus

5.3.4.2 Record

On this page, you can configure the recording parameters and recording schedule for each
channel.
5.3.4.2.1 Record
Stream
Snapshot
Channel: Select a channel.
Stream Mode: Select a recording mode for the channel. If you select Dual-Stream, the system
will record both Main Stream and Sub Stream. If you select Main Stream, the system will record
Main Stream only. Note that if you want to play back recordings of sub stream on the playback
page, you will have to select Dual-Stream here.
Record: Switch the button to the right to enable the function.
Pre-Record: Switch the button to the right to enable the function. The DVR will start recording
a few seconds before an alarm/event is triggered.
Click Save to save the settings or Refresh to refresh the page.
Click the Copy button to display the channel options. Select the channels and then click the
Copy button to copy the same configurations from this channel to the selected channels.
188