Ftp Schedule - EverFocus VANGUARD 16x8H Plus User Manual

H.265 VANGUARD 16x8H Plus

5.3.6.4.2 FTP Schedule

You can configure the FTP schedule on this page. The selected event recordings will be
uploaded to the FTP by the scheduled time. For example, if you set up Motion on Sunday
between 6-8am, the Motion recordings will be uploaded to FTP between 6-8am on Sunday.
Note that for the FTP Schedule function to work, you have to enable FTP Video Upload function
on the related alarm setup page (Motion, PIR, IO, Intelligent).
Channel: Select a channel to configure the FTP schedule individually.
Normal: Click the Normal button on the right-side and then move your mouse cursor over the
schedule time blocks. Click and drag on the schedule time blocks to draw the blocks with green
color, which will be applied with normal recording FTP upload function. Note that for this
function to work, you have to select the desired channel(s) for uploading the normal recordings
(please refer to Upload Normal Video in 5.3.6.4.1 FTP.
Motion: Click the Motion button on the right-side and then move your mouse cursor over the
schedule time blocks. Click and drag on the schedule time blocks to draw the blocks with yellow
color, which will be applied with motion FTP upload function. To enable Motion alarm, please
refer to 5.3.5.1 Motion.
Alarm (IO): Click the Alarm button on the right-side and then move your mouse cursor over the
schedule time blocks. Click and drag on the schedule time blocks to draw the blocks with red
color, which will be applied with IO FTP upload function. To enable IO alarm, refer to 5.3.5.3 IO.
212