Record Schedule - EverFocus VANGUARD 16x8H Plus User Manual

H.265 VANGUARD 16x8H Plus

5.3.4.2.2 Record Schedule

On this page, you can configure the recording schedule for Normal, Motion or PIR recordings.
Stream
Snapshot
Channel: Select a channel from the drop-down list.
Normal: Move your mouse cursor over the schedule time blocks. The first line of the time block
on each day is the Normal time blocks. Click and drag on the schedule time blocks to draw the
blocks with green color, which will be applied with normal recording function.
Motion: Move your mouse cursor over the schedule time blocks. The second line of the time
block on each day is the Motion time blocks. Click and drag on the schedule time blocks to draw
the blocks with yellow color, which will be applied with motion recording function. Note that
for this function to work, you will have to configure the motion settings in advance (please refer
to 5.3.5.1 Motion Alarm).
Alarm (IO): Move your mouse cursor over the schedule time blocks. The third line of the time
block on each day is the IO time blocks. Click and drag on the schedule time blocks to draw the
blocks with red color, which will be applied with IO recording function. Note that for this
function to work, you will have to configure the IO settings in advance (please refer to 5.3.5.3
I/O Alarm).
PIR: Move your mouse cursor over the schedule time blocks. The fourth line of the time block
on each day is the PIR time blocks. Click and drag on the schedule time blocks to draw the
blocks with purple color, which will be applied with PIR recording function. Note that for this
189