Snapshot Schedule - EverFocus VANGUARD 16x8H Plus User Manual

5.3.4.3.2 Snapshot Schedule

On this page, you can configure the snapshot schedule.
Stream
Snapshot
Snapshot
Snapshot Schedule
Channel: Select a channel from the drop-down list.
Normal: Move your mouse cursor over the schedule time blocks. The first line of the time block
on each day is the Normal time blocks. Click and drag on the schedule time blocks to draw the
blocks with green color, which will be applied with normal snapshot function.
Motion: Move your mouse cursor over the schedule time blocks. The second line of the time
block on each day is the Motion time blocks. Click and drag on the schedule time blocks to draw
the blocks with yellow color, which will be applied with motion snapshot function. Note that for
this function to work, you will have to configure the motion settings in advance (please refer to
5.3.5.1 Motion Alarm).
Alarm (IO): Move your mouse cursor over the schedule time blocks. The third line of the time
block on each day is the IO time blocks. Click and drag on the schedule time blocks to draw the
blocks with red color, which will be applied with IO snapshot function. Note that for this
function to work, you will have to configure the IO settings in advance (please refer to 5.3.5.3
I/O Alarm).
PIR: Move your mouse cursor over the schedule time blocks. The fourth line of the time block
on each day is the PIR time blocks. Click and drag on the schedule time blocks to draw the
blocks with purple color, which will be applied with PIR snapshot function. Note that for this
H.265 VANGUARD 16x8H Plus
192