Intelligent Alarm - EverFocus VANGUARD 16x8H Plus User Manual

5.3.5.4 Intelligent Alarm

After configuring the Intelligent functions, you can further configure the Alarm settings for each
intelligent function. To configure the Intelligent functions, please refer to 5.3.8 Intelligent).
The Intelligent Alarm setup configurations for each intelligent function are similar. Here we use
Perimeter Intrusion alarm setup page for example.
Perimeter Intrusion
Line-Crossing
Foreign/Missing Object
Pedestrian Detection
Face Detection
Cross-Counting
Sound Detection
Tamper Detection
Channel: Select a channel from the drop-down list.
Buzzer: Select a time for DVR buzzer to sound when an event is triggered. Select Disable to
disable the function.
Alarm Output: Select an alarm output time (duration) when events occur. When an event is
triggered, the alarm will last based on the setup latch time.
Post Recording: Select a post recording time when an event is triggered.
Send Email: Switch the button to the right to enable the Email alert function. When an event is
triggered, the DVR will send an email alert with a snapshot to the pre-configured Email receiver.
Note that for this function to work, you have to set up the Email function in advance (refer to
5.3.6.3 Email).
Show Message: Switch the button to the right to enable displaying an alarm message "S" on
the live channel when an event is triggered.
Full Screen: Switch the button to the right to enable the full screen function. If this function is
enabled and an event is triggered, the triggered channel will be displayed in full screen.
H.265 VANGUARD 16x8H Plus
200