Ptz Control - EverFocus VANGUARD 16x8 User Manual

3.5.2

PTZ Control

You can control the connected PTZ camera using the PTZ Control window. On the Live View
window, select a PTZ camera by clicking on the channel, the selected channel will be
highlighted with a red frame. Left click on the channel to display its Live Channel Tool Bar and
then click the PTZ icon to bring up the PTZ Control window. You can use your mouse to drag
the PTZ Control window and drop it to the desired position on the screen.
Channel Drop-Down List: Click to select a channel of PTZ camera you want to control.
Start Tour : Click to start the Tour function. Click again to stop the Tour function. Note
that for this function to work, users have to set up preset points in advance.
OSD Menu : This button only appears when UTC1 or UTC2 is selected from the Protocol
drop-down list on the PTZ setup page. This button is designed for UTC function, which allows
users to operate analog camera's OSD menu directly through DVR. Please refer to 1.6
eZ.Controller Function Description for more details.
Speed: Slide the bar to the left or right to adjust the control speed.
Direction Buttons: Click the direction buttons to force the PTZ camera to turn to the direction.
Auto Pan : Click to start the Auto Pan function. Click again to stop the Auto Pan function.
Zoom: Click + or – to zoom in or zoom out.
Focus: Click + or – to focus near or focus far.
Iris: Click + or – to adjust the Iris.
Show Preset Window
Points or perform the go to preset function on this window.
VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
: Click to display or hide the Preset window. You can set up Preset
24