Video Output - EverFocus VANGUARD 16x8H Plus User Manual

4.9.1.3 Video Output

You can configure the Main monitor and Call monitor settings on this page.
Main Monitor Setting
Video Output: Select Live Output (Main Monitor) and then configure the below settings.
Sequence Layout: Select a layout for the sequence mode. For example, if you select Layout4,
the DVR will display a quad view layout for all channels in sequence order. To start the
sequence mode, go to OSD menu > Layout and then click the Auto Sequence button. Click
the button again to stop sequence mode.
Sequence Interval Time: Input a sequence interval time in second. By default, 5 seconds is
set up.
Output Resolution: Select a live resolution to be displayed on the output monitor. 1920 x
1080 will suit most TVs. If your DVR supports 4K output resolution, you can select either 2K
(2560 x 1440) or 4K (3840 x 2160) to take advantage of the higher resolution that your 4K TV
provides.
Scale and Offset: The DVR supports to adjust the size and position of the display screen to
match your monitor or TV. Click the Setup button to adjust.
Click once or long press the left button of your mouse on the arrow to adjust the size and
position, or you can scroll the wheel of the mouse to adjust. Click the right button of your
mouse to exit, and click Apply to save your modifications.
Cursor Hidden Delay: Click the drop-down menu to select the time your DVR will hide the
mouse cursor when idle. You can also disable this function by selecting Off (password
protection will be temporarily disabled).
H.265 VANGUARD 16x8H Plus
Scale: To adjust the size of the displayed screen
by scale.
X Offset: To move the displayed screen to the
left or right.
Y Offset: To move the displayed screen to the
top or bottom.
128