Line-Crossing - EverFocus VANGUARD 16x8H Plus User Manual

5.3.3.8.2 Line-Crossing

When objects (people, vehicle or other objects) cross a pre-defined line, the Line Crossing
Detection event will be triggered. You can configure some event actions like event recording,
Email alert or pop-up full screen when an event is triggered.
Perimeter Intrusion
Line-Crossing
Foreign/Missing Object
Pedestrian Detection
To configure the settings:
1. Select a channel and then switch the Switch button to the right to enable this function.
2. Select a sensitivity value. The larger the value, the higher the sensitivity.
3. Select Indoor or Outdoor based on the location where your IP camera is installed.
4. Select 1 from the Rule Number drop-down list to configure the first line.
5. Enable the Rule Switch and then define a Rule Type.
AB: Detects movement from A to B.
BA: Detects movement from B to A.
AB: Detects both movements from A to B and from B to A.
6. Switch the IVA Lines button to the right if you want to enable displaying the IVA line on the
live streams.
7. To draw a line:
a. Use your mouse to click 2 points to draw a line.
b. If you want to move the line to other position or re-draw the line, select the line by
checking the red box on the upper-side of the line, the line will change to red color. Drag
and drop the line to a desired position. Drag the red dots of the line can re-size the line.
1
H.265 VANGUARD 16x8H Plus
170