EverFocus VANGUARD 16x8H Plus User Manual page 174

Backlight: Switch the button to the right to enable the BLC (Backlight Compensation) function.
BLC Level: Adjust the level for the BLC function.
BLC Area: Select an area to apply the BLC function.
3D Noise Reduction: Select Auto to
• Auto: Select Auto for the camera to automatically turn on the 3DNR function.
• Manual: Select to turn on the 3DNR function based on the setup Level.
• Disable: Select to disable the 3DNR function.
WDR: Switch the button to the right to enable the WDR function and then you will have to
adjust a Level for the WDR function.
AGC: If you select Manual in the Shutter field, set up the AGC for the camera. The lower the
AGC level, the lower the video signal and the noise.
White Balance:
• Auto: Select for the camera to automatically adjust the white balance.
• Manual: Select to adjust the Red, Green, Blue values yourself.
• Indoor: Select Indoor if your camera is installed in an indoor environment.
Shutter:
• Auto: Select for the camera to automatically adjust the Shutter.
• Manual: Select to manually adjust the shutter speed. Select a speed in the Time Exposure
field. Also set up the AGC in the AGC field above.
Time Exposure: If you select Auto in the Shutter field, the camera will automatically apply a
max. shutter speed. If you select Manual in the Shutter field, select a shutter speed from the
drop-down list.
Defog Mode:
• Auto: Select Auto for the camera to automatically turn on the Defog function.
• Manual: Select to turn on the Defog function based on the setup Level.
• Disable: Select to disable the Defog function.
Click Refresh to refresh the page; click Save to save the settings.
H.265 VANGUARD 16x8H Plus
163