Alarm; Motion - EverFocus VANGUARD 16x8H Plus User Manual

4.3 Alarm

You can configure the alarm settings on this page.
4.3.1

Motion

After configuring the Motion Detection settings, you can further configure the Motion Alarm
settings. To configure the Motion Detection setting, click the Motion button to enter the
Motion Detection setup page (please refer to 4.1.6 Motion).
Channel: Displays the channel number.
Buzzer: Select a time for DVR buzzer to sound when a motion event is triggered. Select
Disable to disable the function.
Alarm Out: Select an external alarm output device connected to the DVR, IPCam or both.
Alarm Output: Select an alarm output time (duration) when events occur. When an event is
triggered, the alarm will last based on the setup time.
Record: Click and select the desired channel(s) you want to record when a motion event is
triggered. Note that for recording function to work, the Record Schedule function has to be
configured (please refer to 4.2.2.2 Record Schedule).
Post Recording: Select a post recording time when a motion event is triggered.
Show Message: Check the box to display the motion icon
motion event is triggered.
H.265 VANGUARD 16x8H Plus
on the live channel when a
72