Ftp - EverFocus VANGUARD 16x8H Plus User Manual

H.265 VANGUARD 16x8H Plus
4.4.4

FTP

4.4.4.1 FTP
You can configure the FTP server setting on this page. When there is a Motion or I/O event
occurs, the system will send an instant snapshot image to the FTP. For system alarm such as
HDD lost and Video loss, the system will send alarm log to the FTP as well.
FTP Enable: Check the box to enable the function.
Server IP: Input the FTP server IP.
Test FTP: Click to test the FTP server connection.
Port: Keep the port 21.
User Name: Input the user name of the FTP server.
Password: Input the password of the FTP server.
Picture Resolution: Select a resolution of the snapshot images for FTP uploading.
Picture Quality: Select a quality of the snapshot images for FTP uploading.
Video Stream Type: Select a stream type of the recordings for FTP uploading.
Max. Package Interval: Select a max. package interval for FTP uploading.
Directory Name: Input a directory of the FTP server.
Upload Normal Video: Select the desired channel(s) for uploading the normal recordings. For
this function to work, please setup the FTP Schedule (refer to 4.4.4.2 FTP Schedule) in advance.
Upload Alarm Video: To enable uploading alarm videos to the FTP Server, click the Motion,
PIR, IO or Intelligent buttons to enter each alarm setup page, and then check the FTP Video
Upload box to enable the function. For this function to work, please setup the FTP Schedule
(refer to 4.4.4.2 FTP Schedule) in advance.
Default: Click to apply the default setting.
Apply: Click to save the settings.
91