Camera List - EverFocus VANGUARD 16x8H Plus User Manual

The Status Icons displayed on the bottom-left of each channel are
designed to alert users when any of the following situations occur:
7 Status Icon

5.2.1 Camera List

The Camera list lists the analog and IP camera channels. You can use the camera list icons to
perform some functions. If the channel is not connected or the channel has been disabled, the
icons will be gray-out.
Play: Click to display / hide the camera stream on the Live window.
Record: Click to start manual record of the channel, click again to stop, a message window
appears on the bottom-left corner of the screen. Click Folder to open the folder to find the
recording file. To change the manual record storage path or select a file format, please refer to
5.3.8.5 Local Settings.
Snapshot: Click to take a manual snapshot of the channel, a message window appears on the
bottom-left corner of the screen. Click Folder to open the folder to find the snapshot image. Or
click Preview to preview the snapshot image. To change the manual snapshot storage path,
please refer to 5.3.8.5 Local Settings.
R The channel is on normal recording.
H No HDD / HDD error / HDD not formatted
M Motion event is triggered.
M Motion event is triggered. Motion event is recording.
I Alarm event is triggered.
I Alarm event is triggered. Alarm event is recording.
S Intelligent event is triggered.
S Intelligent event is triggered. Intelligent event is recording.
C Tamper alarm is detected.
Click to Collapse/Expand camera list
Play
Record
147
H.265 VANGUARD 16x8H Plus
Capture
Bitrate