Foreign/Missing Object; Configuring Foreign/Missing Areas - EverFocus VANGUARD 16x8H Plus User Manual

4.1.8.3 Foreign/Missing Object

When camera detects foreign (unattended) or missing objects in a pre-defined area, the
Foreign/Missing Object event will be triggered. You can configure some event actions like
event recording, Email alert or pop-up full screen when an event is triggered.
To configure the Foreign/Missing Object settings:
1. Check the Switch checkbox to enable the function of the channel.
2. Select a Sensitivity value from the drop-down list. The larger the value, the higher the
sensitivity.
3. In the Scene field, select Indoor or Outdoor based on the location where your camera is
installed.
4. In the Setup field, click
Configuring Foreign/Missing Areas for more details.
5. Click the Apply button to save the settings
6. To further set up the alarm notifications, click the Alarm button to enter the Alarm setup
page. Please refer to 4.3.4 Intelligent Alarm.
7. If you want to activate the intelligent recording function, you need to configure the
recording schedule. Please refer to 4.1.8.9 Record Schedule.

4.1.8.3.1 Configuring Foreign/Missing Areas

Click the Setup button
to set up the detection areas. Please refer to 4.1.8.3.1
to enter the Area setup page.
Missing & Foreign
51
H.265 VANGUARD 16x8H Plus