Protocol Manage - EverFocus VANGUARD 16x8H Plus User Manual

Add: Click to add an IP camera.
Edit: Click to edit IP camera profile.
Modify: Click to modify IP camera settings.
State: Shows the status of the IP camera.

5.3.3.1.2 Protocol Manage

On this page, you can edit RTSP (Custom 1-16) protocol for IP camera connection.
Custom Protocol: Select a custom RTSP protocol profile from the drop-down list to be
configured. Up to 10 profiles can be configured.
Protocol Name: Input a name for this RTSP protocol profile.
Stream Type: Indicates Main Stream and Sub Stream are supported. You can separately
configure the Main Stream and Sub Stream settings below.
Sub Stream: Switch the button to the right to enable sub stream for this RTSP protocol.
Type: Select RTSP.
Port: Input the RTSP port of your IP camera. Keep 554 as the RTSP port.
Resources Path: Input the RTSP URL syntax in the box. For example:
rtsp://[IP Address]:[Port]/ch[A]/[B]
rtsp://192.168.31.33:554/ch01/0
* IP Address: The IP address of the DVR
* A: Channel number. 01 (ch1), 02 (ch2), and so on
* B: Stream Type: 0 (main stream), 1 (sub stream)
Click Save to save the settings or Refresh to refresh the page.
H.265 VANGUARD 16x8H Plus
160