Ftp - EverFocus VANGUARD 16x8H Plus User Manual

H.265 VANGUARD 16x8H Plus

5.3.6.4 FTP

5.3.6.4.1 FTP
You can configure the FTP server setting on this page. When there is a Motion or I/O event
occurs, the system will send an instant snapshot image to the FTP. For system alarm such as
HDD lost and Video loss, the system will send alarm log to the FTP as well.
FTP Enable: Switch the button to the right to enable the function.
Server: Input the FTP server IP.
Port: Keep the port 21.
Username: Input the user name of the FTP server.
Password: Input the password of the FTP server.
DIR Name: Input the directory of the FTP server.
Snapshot Resolution: Select a resolution of the snapshot images for FTP uploading.
Snapshot Quality: Select a quality of the snapshot images for FTP uploading.
Video Stream Type: Select a stream type of the recordings for FTP uploading.
Max. Package Interval: Select a max. package interval for FTP uploading.
Upload Normal Video: Switch the button to the right to enable uploading normal video to FTP
and then select the desired channel(s) for uploading the normal recordings. For this function to
work, please setup the FTP Schedule (refer to 5.3.6.4.2 FTP Schedule) in advance.
Test FTP: Click to test the FTP server connection.
Click Save to save the settings or Refresh to refresh the page.
211