EverFocus VANGUARD 16x8H Plus User Manual page 63

1. Select 1 from the Rule Number drop-down list to configure the first area.
2. Select Enable from the Rule Switch drop-down list to enable this rule.
3. Define a type for this rule. Missing & Foreign: DVR will detect both missing objects and
unattended objects.
4. Select Enable from the IVA Lines to display the IVA line on the live streams.
5. To draw an area:
a. Use your mouse to click 4 points to draw a rectangle shape. The shape should be
convex. Concave shape is not allowed.
b. If you want to move the area to other position or re-size the area, select the area by
checking the red box on the upper-left corner of the area, the borders of the area will
change to red color. Drag and drop the area to a desired position. Drag the red dots
at the edge of the area can re-size the area.
1 Missing & Foreign
c. Click the Save button to save the settings.
d. Follow the steps above to configure more areas. Up to 4 areas can be configured.
e. You can click the Remove All button to remove all the areas. To remove a certain
area, select the area by checking the red box on the upper-left corner of the area,
and then click the Remove button.
Note: For foreign/missing object, please draw an area slightly larger than or equal to
the detected object, and the detected object cannot be covered.
6. To return to the Foreign/Missing Object setup page, right-click the mouse.
1 Lost & Legacy
52
H.265 VANGUARD 16x8H Plus