EverFocus VANGUARD 16x8H Plus User Manual page 186

d. You can click the Clear button to remove all the areas. To remove a certain area, select
the area by checking the red box on the upper-left corner of the area, and then click
the Delete button.
Note: The configured areas should not be too narrow or small in order to enhance
the detection rate. The whole target object (people) should be inside the area.
7. You can click the Copy button to display the channel options. Select the channels and then
click the Copy button to copy the same configurations from this channel to the selected
channels.
8. To further set up the Intelligent alarm function, enter the alarm setup page (please refer to
5.3.5.4 Intelligent Alarm).
9. To activate the intelligent recording function, you need to configure the record schedule
(please refer to 5.3.3.8.9 Record Schedule).
H.265 VANGUARD 16x8H Plus
175